Inheritance diagram for ModuleJettison:

Public Member Functions

void AssumeDragCubePosition (string name)

Used by the DragCubeSystem when it is generating drag cube entries on startup if none are found for this module. When called the module should set it's model position/setup to match the expected position/orientation when 'name' drag cube is active. More...

void DecoupleAction (string nodeName, bool weDecouple)

string[] GetDragCubeNames ()

Should return an array of strings that are the drag cube names that this module implements. More...

float GetModuleMass (float defaultMass, ModifierStagingSituation sit)

Return the amount to modify the original part's dry mass by. Returned values are added to the base mass. (0 means no effect) More...

ModifierChangeWhen GetModuleMassChangeWhen ()

Return under which circumstances the modulemass changes More...

override string GetStagingDisableText ()

override string GetStagingEnableText ()

bool IsMoving ()

override bool IsStageable ()

Should this module be counted when seeing whether to have a stack icon present? Override in a module for custom behavior; otherwise returns true if the module (or something the module inherits from above PartModule itself) overrides OnActive() More...

void Jettison ()

void JettisonAction (KSPActionParam param)

override void OnActive ()

Called when the part is set active (after unpacking etc) More...

override void OnInventoryModeDisable ()

This method will be called when this modules part and itself is first disabled (when it is not attached to a vessel) when created in Inventory/Construction mode. More...

override void OnLoad (ConfigNode node)

Use OnLoad to load any additional data from the ConfigNode provided More...

override void OnStart (PartModule.StartState state)

void SetScalar (float t)

Call to tell the module to assume the given state. Mind transition may not happen instantly. Check GetScalar for the actual state of the thing. More...

void SetUIRead (bool state)

Call to set whether or not the module will display its own UI. Read and Write define which kinds of information are allowed to be displayed More...

void SetUIWrite (bool state)

Call to set whether or not the module will display its own UI. Read and Write define which kinds of information are allowed to be displayed More...

bool UsesProceduralDragCubes ()

Used by the DragCubeSystem when it is generating drag cube entries on startup if none are found for this module. Should return true if this module is to use procedural drag cubes and false if it is to generate drag cubes for the drag cube names returned in GetDragCubeNames method. More...

Public Member Functions inherited from PartModule

void AddPartModuleAdjuster (AdjusterPartModuleBase newAdjuster)

Call this to add an adjuster to this part module. More...

void AddPartModuleAdjusterList (List< AdjusterPartModuleBase > moduleAdjusters)

Applies the appropriate module adjusters. Performs checks to make sure that the adjusters are valid too. More...

bool AppliedUpgrades ()

Returns true if upgrades are applied More...

void ApplyAdjustersOnStart ()

Called when a part module is loaded and applies all of the currently loaded adjusters. More...

virtual void ApplyUpgradeNode (List< string > appliedUps, ConfigNode node, bool doLoad)

Applies the upgrades to a confignode. Will either copy the upgrades back to the node or (if doLoad) calls load/onload on it. More...

virtual bool ApplyUpgrades (StartState state)

Will find and apply upgrades. Called during Part's ModulesOnStart, before a module's OnStart. More...

void Awake ()

delegate bool boolPMApplyUpgrades (PartModule pm, StartState state)

delegate bool boolPMBoolDelegate (PartModule pm, bool apply)

void ClearPersistentId ()

Clear the modules persistentId More...

void Copy (PartModule fromModule)

virtual void DemoteToPhysicslessPart ()

This method will be called from Part class DemoteToPhysicslessPart when the part is being converted from physical to physicsless part. It is called before the joints and rigidbodies are destroyed. More...

virtual bool FindUpgrades (bool fillApplied, ConfigNode node=null)

Find applicable upgrades to the partmodule (isunlocked and isenabled) and add to the upgradesApplied list. Pass true if you want to add the upgrades to upgradesApplied, false if you just want to know if at least one upgrade is applicable (unlocked rather than enabled) More...

virtual Color GetCurrentColor ()

Returns the current part module color. More...

virtual Color GetCurrentColor (string fieldName)

Returns the current part module color for a field where usespe. More...

virtual string GetInfo ()

Returns formatted string of additional data for use in the VAB and SPH More...

virtual string GetModuleDisplayName ()

Override this to provide a Localized version of the PartModules Name for UI components More...

uint GetPersistenActiontId ()

Get the modules persistentID, and create one if it doesnt already have one More...

uint GetPersistentId ()

Get the modules persistentID, and create one if it doesnt already have one More...

virtual string GetUpgradeInfo ()

Called by Upgrade Stats dialog More...

bool HasUpgrades ()

Returns true if upgrades exist for the partmodule More...

bool IsValidContractObjective (string objectiveType)

Returns if, for example, an antenna part module qualifies as an antenna for contracts. More...

void Load (ConfigNode node)

virtual void LoadUpgrades (ConfigNode node)

Loads module-relevant upgrades from the partmodule confignode More...

uint NewPersistentId ()

Reset the modules persistentId to a new number More...

virtual void OnAwake ()

Method fires once the module has been added to the part. Use for first time setup. Module will not have loaded fully by this point More...

virtual void OnColorChanged (Color color)

Meant to be overwritten by part modules implementing color changes. In this case, it doesn't matter which color picker changed specifically. More...

virtual void OnColorChanged (Color color, string pickerID="")

Meant to be overwritten by part modules implementing color changes More...

virtual void OnConstructionModeFixedUpdate ()

This method will be called when in EVA Construction mode and this part and itself is disabled (when it is not attached to a vessel) every FixedUpdate(). More...

virtual void OnConstructionModeUpdate ()

This method will be called when in EVA Construction mode and this part and itself is disabled (when it is not attached to a vessel) every Update(). More...

virtual void OnCopy (PartModule fromModule)

Use OnCopy to copy any additional data from the PartModule provided More...

virtual void OnFixedUpdate ()

Called every physics/fixed frame that the part is active More...

virtual void OnIconCreate ()

Method fires just before components are stripped from the gameobject to make it an icon. (The part is instantiated and then various components like Part, PartModule, EffectBehaviour, Colliders, Particles, etc are stripped and then it's set as the icon prefab. This lets PartModules do stuff to the model right before that happens. More...

virtual void OnInactive ()

Called before the part goes inactive (after packing etc) More...

virtual void OnInitialize ()

Called on all modules after all parts are loaded but before they give the ship to the game More...

virtual void OnInventoryModeEnable ()

This method will be called when this modules part and itself is first enabled (when it is attached to a vessel) when created in Inventory/Construction mode. More...

void OnModuleAdjusterAddedWrapper (AdjusterPartModuleBase adjuster)

Wrapper to check the mission expansion availability before performing processing specific to this part module when an adjuster is added. More...

virtual void OnModuleAdjusterRemoved (AdjusterPartModuleBase adjuster)

Perform processing specific to this part module when an adjuster is removed. By default this does nothing is up to each part module to implement it properly. More...

virtual void OnPartCreatedFomInventory (ModuleInventoryPart moduleInventoryPart)

This method is called when a part is being taken out from a slot while being in EVAConstruction mode. More...

virtual void OnSave (ConfigNode node)

Use OnSave to serialize additional module information into the ConfigNode provided More...

virtual void OnStart (StartState state)

Called when the part starts. The StartState gives an indication of where in flight you are. All values may not be plugged in! More...

virtual void OnStartBeforePartAttachJoint (StartState state)

Called in flight scene in Part.Start just before the Part attachnode joints are created. More...

virtual void OnStartFinished (StartState state)

Called when the part finishes starting. The StartState gives an indication of where in flight you are. All values may not be plugged in! More...

virtual void OnStoredInInventory (ModuleInventoryPart moduleInventoryPart)

Called when the part is stored in an inventory. More...

virtual void OnUpdate ()

Called every frame that the part is active More...

virtual void OnWasCopied (PartModule copyPartModule, bool asSymCounterpart)

Called when the PartModule was copied, through Alt+Copy or symmetry More...

virtual void OnWillBeCopied (bool asSymCounterpart)

Called when the PartModule is about to be copied, through Alt+Copy or symmetry More...

virtual bool OnWillBeMirrored (ref Quaternion rotation, AttachNode selPartNode, Part partParent)

This is called in the Editor scene when a symmetry copy of a part is being positioned. Only called on the symmetry parts and only when symmetry mode is set to Mirror. It allows the mirror rotation to be changed and returned before being applied to the symmetry copy part.

Parameters

rotation	The current calculated rotation. Will be updated if method returns true.
selPartNode	The attachnode.
partParent	The part that will become this part's parent.

Returns: True if the rotation was changed. Otherwise will return false.

More...

virtual List< Color > PresetColors ()

Preset colors received for any part module. By default, returns only black, override to make your own selection. More...

virtual string PrintUpgrades ()

virtual void PromoteToPhysicalPart ()

This method will be called from Part class PromoteToPhysicalPart when the part is being converted from physicsless to physical part. More...

void RemovePartModuleAdjuster (AdjusterPartModuleBase oldAdjuster)

Call this to remove an adjuster from this part module. More...

void RemovePartModuleAdjusterList (List< AdjusterPartModuleBase > moduleAdjusters)

Removes the appropriate module adjusters. Performs checks to make sure that the adjusters are valid too. More...

void Save (ConfigNode node)

virtual void SetStaging (bool newValue)

Run by the part's staging toggle handler, sets staging on modules on symmetry counterparts. More...

void SetStagingState (bool newState)

Set the staging enabled bool for this module. More...

virtual bool StagingEnabled ()

Gets current staging status (is staging enabled for this module) Override me! More...

virtual bool StagingToggleEnabledEditor ()

virtual bool StagingToggleEnabledFlight ()

void ToggleStaging ()

virtual void UpdateStagingToggle ()

Updates the staging toggle More...

delegate void voidPMApplyNodeDelegate (PartModule pm, List< string > appliedUps, ConfigNode node, bool doLoad)

delegate void voidPMDelegate (PartModule pm)

delegate void voidPMNodeDelegate (PartModule pm, ConfigNode node)

Public Attributes
string	actionSuffix = ""

string	activejettisonName = ""

bool	allowShroudToggle = true

string	bottomNodeName = "bottom"

bool	checkBottomNode = false

bool	decoupleEnabled = true

float	forceScalar = 10f

bool	hideJettisonMenu = false

bool	ignoreNodes = false
	If true will ignore all attachNode processing. More...

bool	isFairing = true

bool	isJettisoned = false

Vector3	jettisonDirection = new Vector3(0, 0, 1)

float	jettisonedObjectMass = 0.1f
	A fixed amount to apply to the jettisoned Object mass and to remove from the part mass if modifyJettisonedMass is true. More...

float	jettisonForce = 5f

string	jettisonName = "Fairing"

bool	manualJettison = false

string	menuName = ""

bool	modifyJettisonedMass = false
	If true will modify the part mass by the calculated or jettisonedObjectMass when jettisoned. More...

string	moduleID = "jettison"

bool	shroudHideOverride = false

bool	useCalculatedMass = false
	If true uses calculated mass based on bounds size percentage of the part mass. More...

bool	useMultipleDragCubes = true

bool	useProceduralDragCubes = false

Public Attributes inherited from PartModule
bool	isEnabled = true

bool	moduleIsEnabled = true

string	moduleName

bool	overrideStagingIconIfBlank = true

ModuleResourceHandler	resHandler = new ModuleResourceHandler()

bool	showUpgradesInModuleInfo = false

ProtoPartModuleSnapshot	snapshot

string	stagingDisableText = ""

bool	stagingEnabled = true

string	stagingEnableText = ""

bool	stagingToggleEnabledEditor = false

bool	stagingToggleEnabledFlight = false

List< ConfigNode >	upgrades

List< string >	upgradesApplied = new List<string>()

bool	upgradesApply = true

bool	upgradesAsk = true

Properties
bool	CanMove `[get]`

float	GetScalar `[get]`

bool	IsMultipleCubesActive `[get]`

Transform	jettisonTransform `[get, set]`

EventData< float, float >	OnMoving `[get]`

EventData< float >	OnStop `[get]`

string	ScalarModuleID `[get]`

Properties inherited from PartModule
BaseActionList	Actions `[get]`

int	ClassID `[get]`

string	ClassName `[get]`

List< AdjusterPartModuleBase >	CurrentModuleAdjusterList `[get]`
	List of all the module adjusters that are currently active on this part module. More...

BaseEventList	Events `[get]`

BaseFieldList	Fields `[get]`

string	GUIName `[get]`

bool	HasAdjusters `[get]`
	Has this part module been adjusted? More...

ReflectedAttributes	ModuleAttributes `[get, set]`

Part	part `[get, set]`

uint	PersistentActionsId `[get, set]`
	A unique identifier for each vessel including from when it was Shipconstruct More...

uint	PersistentId `[get]`
	A unique identifier for each vessel including from when it was Shipconstruct More...

Vessel	vessel `[get]`

Properties inherited from IScalarModule
bool	CanMove `[get]`
	A flag stating whether or not the module is able to change state at all. More...

float	GetScalar `[get]`

EventData< float, float >	OnMoving `[get]`

EventData< float >	OnStop `[get]`

string	ScalarModuleID `[get]`

Properties inherited from IMultipleDragCube
bool	IsMultipleCubesActive `[get]`
	Used by the DragCubeSystem when it is generating drag cube entries on startup if none are found for this module. Should return true if multiple drag cubes are expected to be generated for the part this module is a part of or false if not. More...

Additional Inherited Members
Public Types inherited from PartModule
enum	PartUpgradeState { PartUpgradeState.NONE, PartUpgradeState.LOCKED, PartUpgradeState.AVAILABLE }

enum	StartState { StartState.None = 0, StartState.Editor = 1, StartState.PreLaunch = 2, StartState.Landed = 4, StartState.Docked = 8, StartState.Flying = 16, StartState.Splashed = 32, StartState.SubOrbital = 64, StartState.Orbital = 128 }

Static Public Member Functions inherited from PartModule
static ReflectedAttributes	GetReflectedAttributes (Type partModuleType)

static PartUpgradeState	UpgradesAvailable (Part part)
	Returns true if at least one module on the part has at least one upgrade available (isUnlocked) More...

static PartUpgradeState	UpgradesAvailable (Part part, ConfigNode node)
	Returns true if at least one module on the part has at least one upgrade available (isUnlocked) More...

Static Public Attributes inherited from PartModule
static voidPMApplyNodeDelegate	ApplyUpgradeNodeDel

static boolPMApplyUpgrades	ApplyUpgradesDel

static bool	ApplyUpgradesEditorAuto = true

static boolPMBoolDelegate	FindUpgradesDel

static voidPMNodeDelegate	LoadExpansionNodes
	Hook for loading extra nodes common to all part modules. More...

static voidPMNodeDelegate	LoadUpgradesDel

static voidPMNodeDelegate	SaveExpansionNodes
	Hook for saving extra nodes common to all part modules. More...

static voidPMDelegate	SetupExpansion
	Hook for performing extra setup common to all part modules. More...

static string	UpgradesAvailableString = "#autoLOC_6002273"

static string	UpgradesLockedString = "#autoLOC_6002274"

Protected Member Functions inherited from PartModule
ConfigNode	GetUpgrade (string name)

virtual void	LoadUpgradesApplied (List< string > applieds, ConfigNode node)
	Load the applied upgrade names More...

virtual void	OnModuleAdjusterAdded (AdjusterPartModuleBase adjuster)
	Perform processing specific to this part module when an adjuster is added. By default this does nothing is up to each part module to implement it properly. More...

virtual void	SaveUpgradesApplied (ConfigNode node)
	Save the applied upgrades. More...

IEnumerator	UpgradeWaitForScenarioModules ()

Static Protected Attributes inherited from PartModule
static Dictionary< string, ConfigNode >	exclusives = new Dictionary<string, ConfigNode>()

static Dictionary< Type, ReflectedAttributes >	reflectedAttributeCache = new Dictionary<Type, ReflectedAttributes>()

Member Function Documentation

void ModuleJettison.AssumeDragCubePosition ( string name )

inline

Used by the DragCubeSystem when it is generating drag cube entries on startup if none are found for this module. When called the module should set it's model position/setup to match the expected position/orientation when 'name' drag cube is active.

Parameters

name	The name of the drag cube to assume the position/setup for.

Implements IMultipleDragCube.

void ModuleJettison.DecoupleAction	(	string	nodeName,
		bool	weDecouple
	)

inline

Implements IActivateOnDecouple.

string [] ModuleJettison.GetDragCubeNames ( )

inline

Should return an array of strings that are the drag cube names that this module implements.

Returns

Implements IMultipleDragCube.

float ModuleJettison.GetModuleMass	(	float	defaultMass,
		ModifierStagingSituation	sit
	)

inline

Return the amount to modify the original part's dry mass by. Returned values are added to the base mass. (0 means no effect)

Returns

Implements IPartMassModifier.

ModifierChangeWhen ModuleJettison.GetModuleMassChangeWhen ( )

inline

Return under which circumstances the modulemass changes

Returns

Implements IPartMassModifier.

override string ModuleJettison.GetStagingDisableText ( )

inlinevirtual

Reimplemented from PartModule.

override string ModuleJettison.GetStagingEnableText ( )

inlinevirtual

Reimplemented from PartModule.

bool ModuleJettison.IsMoving ( )

inline

Implements IScalarModule.

override bool ModuleJettison.IsStageable ( )

inlinevirtual

Should this module be counted when seeing whether to have a stack icon present? Override in a module for custom behavior; otherwise returns true if the module (or something the module inherits from above PartModule itself) overrides OnActive()

Reimplemented from PartModule.

void ModuleJettison.Jettison ( )

inline

< Handle Velocity

< Getting the position of the part relative to the center of mass of the part

< Calculating and adding the tangental speed vector to the world speed vector.

void ModuleJettison.JettisonAction ( KSPActionParam param )

inline

override void ModuleJettison.OnActive ( )

inlinevirtual

Called when the part is set active (after unpacking etc)

Reimplemented from PartModule.

override void ModuleJettison.OnInventoryModeDisable ( )

inlinevirtual

This method will be called when this modules part and itself is first disabled (when it is not attached to a vessel) when created in Inventory/Construction mode.

Reimplemented from PartModule.

override void ModuleJettison.OnLoad ( ConfigNode node )

inlinevirtual

Use OnLoad to load any additional data from the ConfigNode provided

Parameters

node

Reimplemented from PartModule.

override void ModuleJettison.OnStart ( PartModule.StartState state )

inline

< Calculate estimated density

void ModuleJettison.SetScalar ( float t )

inline

Call to tell the module to assume the given state. Mind transition may not happen instantly. Check GetScalar for the actual state of the thing.

Parameters

s

Implements IScalarModule.

void ModuleJettison.SetUIRead ( bool state )

inline

Call to set whether or not the module will display its own UI. Read and Write define which kinds of information are allowed to be displayed

Implements IScalarModule.

void ModuleJettison.SetUIWrite ( bool state )

inline

Call to set whether or not the module will display its own UI. Read and Write define which kinds of information are allowed to be displayed

Implements IScalarModule.

bool ModuleJettison.UsesProceduralDragCubes ( )

inline

Used by the DragCubeSystem when it is generating drag cube entries on startup if none are found for this module. Should return true if this module is to use procedural drag cubes and false if it is to generate drag cubes for the drag cube names returned in GetDragCubeNames method.

Returns

Implements IMultipleDragCube.

Member Data Documentation

string ModuleJettison.actionSuffix = ""

string ModuleJettison.activejettisonName = ""

bool ModuleJettison.allowShroudToggle = true

string ModuleJettison.bottomNodeName = "bottom"

bool ModuleJettison.checkBottomNode = false

bool ModuleJettison.decoupleEnabled = true

float ModuleJettison.forceScalar = 10f

bool ModuleJettison.hideJettisonMenu = false

bool ModuleJettison.ignoreNodes = false

If true will ignore all attachNode processing.

bool ModuleJettison.isFairing = true

bool ModuleJettison.isJettisoned = false

Vector3 ModuleJettison.jettisonDirection = new Vector3(0, 0, 1)

float ModuleJettison.jettisonedObjectMass = 0.1f

A fixed amount to apply to the jettisoned Object mass and to remove from the part mass if modifyJettisonedMass is true.

float ModuleJettison.jettisonForce = 5f

string ModuleJettison.jettisonName = "Fairing"

bool ModuleJettison.manualJettison = false

string ModuleJettison.menuName = ""

bool ModuleJettison.modifyJettisonedMass = false

If true will modify the part mass by the calculated or jettisonedObjectMass when jettisoned.

string ModuleJettison.moduleID = "jettison"

bool ModuleJettison.shroudHideOverride = false

bool ModuleJettison.useCalculatedMass = false

If true uses calculated mass based on bounds size percentage of the part mass.

bool ModuleJettison.useMultipleDragCubes = true

bool ModuleJettison.useProceduralDragCubes = false

Property Documentation

bool ModuleJettison.CanMove

get

float ModuleJettison.GetScalar

get

bool ModuleJettison.IsMultipleCubesActive

get

Transform ModuleJettison.jettisonTransform

getset

EventData<float, float> ModuleJettison.OnMoving

get

EventData<float> ModuleJettison.OnStop

get

string ModuleJettison.ScalarModuleID

get

The documentation for this class was generated from the following file:

KSP/Assets/Scripts/Part Scripts/PartModules/Structural/ModuleJettison.cs

Public Member Functions

Public Attributes

Properties

Additional Inherited Members

Member Function Documentation

Member Data Documentation

Property Documentation