ModuleCometDrill Class Reference

Inheritance diagram for ModuleCometDrill:

Public Member Functions
override string	GetInfo ()
	Returns formatted string of additional data for use in the VAB and SPH More...
override string	GetModuleDisplayName ()
	Override this to provide a Localized version of the PartModules Name for UI components More...
override bool	IsSituationValid ()
override void	OnStart (StartState state)
	Called when the part starts. The StartState gives an indication of where in flight you are. All values may not be plugged in! More...
override void	OnUpdate ()
	Called every frame that the part is active More...
Public Member Functions inherited from BaseConverter
virtual bool	CanBeDetached ()
	Returns true if not activate. More...
virtual bool	CanBeOffset ()
	Returns true if not activate. More...
virtual bool	CanBeRotated ()
	Returns true if not activate. More...
virtual void	DisableModule ()
virtual bool	DisplayCoreHeat ()
virtual void	EnableModule ()
virtual void	FixedUpdate ()
virtual double	GetCoreTemperature ()
virtual float	GetCrewEfficiencyBonus ()
	Returns a value used to scale efficiency based on the highest rated crew member with the appropriate specialty (if specialty bonuses are enabled). More...
virtual float	GetCrewHeatBonus ()
	Returns a value used to scale thermal efficiency based on the highest rated crew member with the appropriate specialty (if specialty bonuses are enabled). More...
virtual double	GetEfficiencyMultiplier ()
virtual double	GetFlux ()
virtual double	GetGoalTemperature ()
virtual float	GetHeatThrottle ()
virtual bool	IsOverheating ()
virtual bool	ModuleIsActive ()
override void	OnAwake ()
	Method fires once the module has been added to the part. Use for first time setup. Module will not have loaded fully by this point More...
override void	OnLoad (ConfigNode node)
	Use OnLoad to load any additional data from the ConfigNode provided More...
virtual void	OnOverheat (double amount=1d)
override void	OnSave (ConfigNode node)
	Use OnSave to serialize additional module information into the ConfigNode provided More...
virtual void	SetEfficiencyBonus (float bonus)
virtual void	StartResourceConverter ()
virtual void	StartResourceConverterAction (KSPActionParam param)
virtual void	StopResourceConverter ()
virtual void	StopResourceConverterAction (KSPActionParam param)
virtual void	TallyEfficiencyModifiers ()
virtual void	ToggleResourceConverterAction (KSPActionParam param)
Public Member Functions inherited from PartModule
void	AddPartModuleAdjuster (AdjusterPartModuleBase newAdjuster)
	Call this to add an adjuster to this part module. More...
void	AddPartModuleAdjusterList (List< AdjusterPartModuleBase > moduleAdjusters)
	Applies the appropriate module adjusters. Performs checks to make sure that the adjusters are valid too. More...
bool	AppliedUpgrades ()
	Returns true if upgrades are applied More...
void	ApplyAdjustersOnStart ()
	Called when a part module is loaded and applies all of the currently loaded adjusters. More...
virtual void	ApplyUpgradeNode (List< string > appliedUps, ConfigNode node, bool doLoad)
	Applies the upgrades to a confignode. Will either copy the upgrades back to the node or (if doLoad) calls load/onload on it. More...
virtual bool	ApplyUpgrades (StartState state)
	Will find and apply upgrades. Called during Part's ModulesOnStart, before a module's OnStart. More...
void	Awake ()
delegate bool	boolPMApplyUpgrades (PartModule pm, StartState state)
delegate bool	boolPMBoolDelegate (PartModule pm, bool apply)
void	ClearPersistentId ()
	Clear the modules persistentId More...
void	Copy (PartModule fromModule)
virtual void	DemoteToPhysicslessPart ()
	This method will be called from Part class DemoteToPhysicslessPart when the part is being converted from physical to physicsless part. It is called before the joints and rigidbodies are destroyed. More...
virtual bool	FindUpgrades (bool fillApplied, ConfigNode node=null)
	Find applicable upgrades to the partmodule (isunlocked and isenabled) and add to the upgradesApplied list. Pass true if you want to add the upgrades to upgradesApplied, false if you just want to know if at least one upgrade is applicable (unlocked rather than enabled) More...
virtual Color	GetCurrentColor ()
	Returns the current part module color. More...
virtual Color	GetCurrentColor (string fieldName)
	Returns the current part module color for a field where usespe. More...
uint	GetPersistenActiontId ()
	Get the modules persistentID, and create one if it doesnt already have one More...
uint	GetPersistentId ()
	Get the modules persistentID, and create one if it doesnt already have one More...
virtual string	GetStagingDisableText ()
virtual string	GetStagingEnableText ()
virtual string	GetUpgradeInfo ()
	Called by Upgrade Stats dialog More...
bool	HasUpgrades ()
	Returns true if upgrades exist for the partmodule More...
virtual bool	IsStageable ()
	Should this module be counted when seeing whether to have a stack icon present? Override in a module for custom behavior; otherwise returns true if the module (or something the module inherits from above PartModule itself) overrides OnActive() More...
bool	IsValidContractObjective (string objectiveType)
	Returns if, for example, an antenna part module qualifies as an antenna for contracts. More...
void	Load (ConfigNode node)
virtual void	LoadUpgrades (ConfigNode node)
	Loads module-relevant upgrades from the partmodule confignode More...
uint	NewPersistentId ()
	Reset the modules persistentId to a new number More...
virtual void	OnActive ()
	Called when the part is set active (after unpacking etc) More...
virtual void	OnColorChanged (Color color)
	Meant to be overwritten by part modules implementing color changes. In this case, it doesn't matter which color picker changed specifically. More...
virtual void	OnColorChanged (Color color, string pickerID="")
	Meant to be overwritten by part modules implementing color changes More...
virtual void	OnConstructionModeFixedUpdate ()
	This method will be called when in EVA Construction mode and this part and itself is disabled (when it is not attached to a vessel) every FixedUpdate(). More...
virtual void	OnConstructionModeUpdate ()
	This method will be called when in EVA Construction mode and this part and itself is disabled (when it is not attached to a vessel) every Update(). More...
virtual void	OnCopy (PartModule fromModule)
	Use OnCopy to copy any additional data from the PartModule provided More...
virtual void	OnFixedUpdate ()
	Called every physics/fixed frame that the part is active More...
virtual void	OnIconCreate ()
	Method fires just before components are stripped from the gameobject to make it an icon. (The part is instantiated and then various components like Part, PartModule, EffectBehaviour, Colliders, Particles, etc are stripped and then it's set as the icon prefab. This lets PartModules do stuff to the model right before that happens. More...
virtual void	OnInactive ()
	Called before the part goes inactive (after packing etc) More...
virtual void	OnInitialize ()
	Called on all modules after all parts are loaded but before they give the ship to the game More...
virtual void	OnInventoryModeDisable ()
	This method will be called when this modules part and itself is first disabled (when it is not attached to a vessel) when created in Inventory/Construction mode. More...
virtual void	OnInventoryModeEnable ()
	This method will be called when this modules part and itself is first enabled (when it is attached to a vessel) when created in Inventory/Construction mode. More...
void	OnModuleAdjusterAddedWrapper (AdjusterPartModuleBase adjuster)
	Wrapper to check the mission expansion availability before performing processing specific to this part module when an adjuster is added. More...
virtual void	OnModuleAdjusterRemoved (AdjusterPartModuleBase adjuster)
	Perform processing specific to this part module when an adjuster is removed. By default this does nothing is up to each part module to implement it properly. More...
virtual void	OnPartCreatedFomInventory (ModuleInventoryPart moduleInventoryPart)
	This method is called when a part is being taken out from a slot while being in EVAConstruction mode. More...
virtual void	OnStartBeforePartAttachJoint (StartState state)
	Called in flight scene in Part.Start just before the Part attachnode joints are created. More...
virtual void	OnStartFinished (StartState state)
	Called when the part finishes starting. The StartState gives an indication of where in flight you are. All values may not be plugged in! More...
virtual void	OnStoredInInventory (ModuleInventoryPart moduleInventoryPart)
	Called when the part is stored in an inventory. More...
virtual void	OnWasCopied (PartModule copyPartModule, bool asSymCounterpart)
	Called when the PartModule was copied, through Alt+Copy or symmetry More...
virtual void	OnWillBeCopied (bool asSymCounterpart)
	Called when the PartModule is about to be copied, through Alt+Copy or symmetry More...
virtual bool	OnWillBeMirrored (ref Quaternion rotation, AttachNode selPartNode, Part partParent)
	This is called in the Editor scene when a symmetry copy of a part is being positioned. Only called on the symmetry parts and only when symmetry mode is set to Mirror. It allows the mirror rotation to be changed and returned before being applied to the symmetry copy part. Parameters rotation The current calculated rotation. Will be updated if method returns true. selPartNode The attachnode. partParent The part that will become this part's parent. Returns True if the rotation was changed. Otherwise will return false. More...
virtual List< Color >	PresetColors ()
	Preset colors received for any part module. By default, returns only black, override to make your own selection. More...
virtual string	PrintUpgrades ()
virtual void	PromoteToPhysicalPart ()
	This method will be called from Part class PromoteToPhysicalPart when the part is being converted from physicsless to physical part. More...
void	RemovePartModuleAdjuster (AdjusterPartModuleBase oldAdjuster)
	Call this to remove an adjuster from this part module. More...
void	RemovePartModuleAdjusterList (List< AdjusterPartModuleBase > moduleAdjusters)
	Removes the appropriate module adjusters. Performs checks to make sure that the adjusters are valid too. More...
void	Save (ConfigNode node)
virtual void	SetStaging (bool newValue)
	Run by the part's staging toggle handler, sets staging on modules on symmetry counterparts. More...
void	SetStagingState (bool newState)
	Set the staging enabled bool for this module. More...
virtual bool	StagingEnabled ()
	Gets current staging status (is staging enabled for this module) Override me! More...
virtual bool	StagingToggleEnabledEditor ()
virtual bool	StagingToggleEnabledFlight ()
void	ToggleStaging ()
virtual void	UpdateStagingToggle ()
	Updates the staging toggle More...
delegate void	voidPMApplyNodeDelegate (PartModule pm, List< string > appliedUps, ConfigNode node, bool doLoad)
delegate void	voidPMDelegate (PartModule pm)
delegate void	voidPMNodeDelegate (PartModule pm, ConfigNode node)

Public Attributes
bool	DirectAttach = false
float	PowerConsumption = 1
bool	RockOnly = false
Public Attributes inherited from BaseDrill
float	Efficiency = 1f
	Multiplier against the resource abundance that determines how much a harvester will produce. Used to create the dynamic recipes that harvesters use for resource conversion. More...
float	ImpactRange = 5f
string	ImpactTransform = ""
Public Attributes inherited from BaseConverter
bool	AlwaysActive = false
bool	AutoShutdown = false
string	ConverterName = ""
string	debugCrewBon = ""
string	debugDelta = ""
string	debugEffBonus = ""
string	debugFinBon = ""
string	debugTimeFac = ""
float	DefaultShutoffTemp = 0.8f
bool	DirtyFlag = true
float	EfficiencyBonus = 1
	When determining final efficiency (which is multiplied against all inputs and outputs of a recipe), the EfficiencyBonus will be factored in (multiplied). Defaults to 1 (i.e. no effect), and is persistent. More...
Dictionary< string, float >	EfficiencyModifiers
	When determining final efficiency (which is multiplied against all inputs and outputs of a recipe), each EfficiencyMultiplier will be factored in (multiplied) in sequence. Use for when you want to handle multiple efficiency bonuses. More...
string	ExperienceEffect = "ConverterSkill"
float	FillAmount = 1f
bool	GeneratesHeat = false
List< ResourceRatio >	inputList
bool	IsActivated = false
double	lastHeatFlux = 0d
double	lastTimeFactor
List< ResourceRatio >	outputList
List< ResourceRatio >	reqList
string	resourceOutputName = ""
float	SpecialistBonusBase = 0.05f
float	SpecialistEfficiencyFactor = 0.1f
	How much each level of the specified ExperienceEffect will increase efficiency More...
float	SpecialistHeatFactor = 0.1f
	How much each level of the specified ExperienceEffect will reduce heat More...
string	StartActionName = "#autoLOC_6001471"
string	status = ""
string	StopActionName = "#autoLOC_6001472"
float	TakeAmount = 1
FloatCurve	TemperatureModifier
FloatCurve	ThermalEfficiency
string	ToggleActionName = "#autoLOC_6001473"
bool	UseSpecialistBonus = false
	Whether or not crew experience effects should affect efficiency of the converter More...
bool	UseSpecialistHeatBonus = false
	Whether or not crew experience effects should decrease heat generation of the converter More...
Public Attributes inherited from PartModule
bool	isEnabled = true
bool	moduleIsEnabled = true
string	moduleName
bool	overrideStagingIconIfBlank = true
ModuleResourceHandler	resHandler = new ModuleResourceHandler()
bool	showUpgradesInModuleInfo = false
ProtoPartModuleSnapshot	snapshot
string	stagingDisableText = ""
bool	stagingEnabled = true
string	stagingEnableText = ""
bool	stagingToggleEnabledEditor = false
bool	stagingToggleEnabledFlight = false
List< ConfigNode >	upgrades
List< string >	upgradesApplied = new List<string>()
bool	upgradesApply = true
bool	upgradesAsk = true

Protected Member Functions
virtual bool	CheckForImpact ()
virtual Part	GetAttachedPotato ()
override void	PostProcess (ConverterResults result, double deltaTime)
override ConversionRecipe	PrepareRecipe (double deltaTime)
Protected Member Functions inherited from BaseConverter
virtual void	CheckForShutdown ()
virtual void	ConvertRecipeToUnits (ConversionRecipe recipe)
double	GetBestDeltaTime (double deltaTime)
virtual double	GetDeltaTime ()
virtual int	HasSpecialist (string effect)
virtual void	PostUpdateCleanup ()
virtual void	PreProcessing ()
virtual void	SetupDebugging ()
virtual void	SetupLabels ()
virtual void	SetupModule ()
virtual void	UpdateConverterStatus ()
virtual void	UpdateDebugInfo (ConverterResults result, double deltaTime)
Protected Member Functions inherited from PartModule
ConfigNode	GetUpgrade (string name)
virtual void	LoadUpgradesApplied (List< string > applieds, ConfigNode node)
	Load the applied upgrade names More...
virtual void	OnModuleAdjusterAdded (AdjusterPartModuleBase adjuster)
	Perform processing specific to this part module when an adjuster is added. By default this does nothing is up to each part module to implement it properly. More...
virtual void	SaveUpgradesApplied (ConfigNode node)
	Save the applied upgrades. More...
IEnumerator	UpgradeWaitForScenarioModules ()

Protected Attributes
bool	_isValidSituation = true
Transform	impactTransformCache
Protected Attributes inherited from BaseConverter
bool	_preCalculateEfficiency = false
IResourceBroker	_resBroker
ResourceConverter	_resConverter
float	_totalEfficiencyModifiers
bool	hasAnimationGroup = false
double	lastUpdateTime
ModuleAnimationGroup	partAnimationModule
BaseEvent	startEvt
double	statusPercent

Additional Inherited Members
Public Types inherited from PartModule
enum	PartUpgradeState { PartUpgradeState.NONE, PartUpgradeState.LOCKED, PartUpgradeState.AVAILABLE }
enum	StartState {   StartState.None = 0, StartState.Editor = 1, StartState.PreLaunch = 2, StartState.Landed = 4,   StartState.Docked = 8, StartState.Flying = 16, StartState.Splashed = 32, StartState.SubOrbital = 64,   StartState.Orbital = 128 }
Static Public Member Functions inherited from PartModule
static ReflectedAttributes	GetReflectedAttributes (Type partModuleType)
static PartUpgradeState	UpgradesAvailable (Part part)
	Returns true if at least one module on the part has at least one upgrade available (isUnlocked) More...
static PartUpgradeState	UpgradesAvailable (Part part, ConfigNode node)
	Returns true if at least one module on the part has at least one upgrade available (isUnlocked) More...
Static Public Attributes inherited from PartModule
static voidPMApplyNodeDelegate	ApplyUpgradeNodeDel
static boolPMApplyUpgrades	ApplyUpgradesDel
static bool	ApplyUpgradesEditorAuto = true
static boolPMBoolDelegate	FindUpgradesDel
static voidPMNodeDelegate	LoadExpansionNodes
	Hook for loading extra nodes common to all part modules. More...
static voidPMNodeDelegate	LoadUpgradesDel
static voidPMNodeDelegate	SaveExpansionNodes
	Hook for saving extra nodes common to all part modules. More...
static voidPMDelegate	SetupExpansion
	Hook for performing extra setup common to all part modules. More...
static string	UpgradesAvailableString = "#autoLOC_6002273"
static string	UpgradesLockedString = "#autoLOC_6002274"
Static Protected Attributes inherited from PartModule
static Dictionary< string, ConfigNode >	exclusives = new Dictionary<string, ConfigNode>()
static Dictionary< Type, ReflectedAttributes >	reflectedAttributeCache = new Dictionary<Type, ReflectedAttributes>()
Properties inherited from BaseConverter
virtual IResourceBroker	ResBroker [get]
virtual ResourceConverter	ResConverter [get]
Properties inherited from PartModule
BaseActionList	Actions [get]
int	ClassID [get]
string	ClassName [get]
List< AdjusterPartModuleBase >	CurrentModuleAdjusterList [get]
	List of all the module adjusters that are currently active on this part module. More...
BaseEventList	Events [get]
BaseFieldList	Fields [get]
string	GUIName [get]
bool	HasAdjusters [get]
	Has this part module been adjusted? More...
ReflectedAttributes	ModuleAttributes [get, set]
Part	part [get, set]
uint	PersistentActionsId [get, set]
	A unique identifier for each vessel including from when it was Shipconstruct More...
uint	PersistentId [get]
	A unique identifier for each vessel including from when it was Shipconstruct More...
Vessel	vessel [get]

Member Function Documentation

virtual bool ModuleCometDrill.CheckForImpact ( )

inlineprotectedvirtual

virtual Part ModuleCometDrill.GetAttachedPotato ( )

inlineprotectedvirtual

override string ModuleCometDrill.GetInfo ( )

inlinevirtual

Returns formatted string of additional data for use in the VAB and SPH

Returns

Reimplemented from PartModule.

override string ModuleCometDrill.GetModuleDisplayName ( )

inlinevirtual

Override this to provide a Localized version of the PartModules Name for UI components

Returns

Reimplemented from BaseDrill.

override bool ModuleCometDrill.IsSituationValid ( )

inlinevirtual

Reimplemented from BaseConverter.

override void ModuleCometDrill.OnStart ( StartState  state )

inlinevirtual

Called when the part starts. The StartState gives an indication of where in flight you are. All values may not be plugged in!

Parameters

state

Reimplemented from BaseConverter.

override void ModuleCometDrill.OnUpdate ( )

inlinevirtual

Called every frame that the part is active

Reimplemented from PartModule.

override void ModuleCometDrill.PostProcess ( ConverterResults  result, double  deltaTime  )

inlineprotectedvirtual

Reimplemented from BaseConverter.

override ConversionRecipe ModuleCometDrill.PrepareRecipe ( double  deltaTime )

inlineprotectedvirtual

Reimplemented from BaseConverter.

Member Data Documentation

bool ModuleCometDrill._isValidSituation = true

protected

bool ModuleCometDrill.DirectAttach = false

Transform ModuleCometDrill.impactTransformCache

protected

float ModuleCometDrill.PowerConsumption = 1

bool ModuleCometDrill.RockOnly = false

---

The documentation for this class was generated from the following file:

• KSP/Assets/Scripts/Resources/ModuleCometDrill.cs