Kerbal Space Program  1.7.3
 All Classes Namespaces Files Functions Variables Typedefs Enumerations Enumerator Properties Events Macros
Public Member Functions | Public Attributes | List of all members
CommNet.ModuleRelayEnabler Class Reference

Enables relay for all antennas, not just those of type RELAY. Takes the use ModuleResource setup (RESOURCE) More...

Inheritance diagram for CommNet.ModuleRelayEnabler:
PartModule IResourceConsumer CommNet.IRelayEnabler

Public Member Functions

bool CanRelay ()
 Called when the vessel is loaded, so called on the actual part More...
 
bool CanRelayUnloaded (ProtoPartModuleSnapshot mSnap)
 Called on the part prefab's module, and passed the snapshot of the unloaded vessel's copy of the module More...
 
virtual void FixedUpdate ()
 
List< PartResourceDefinitionGetConsumedResources ()
 
override string GetInfo ()
 Returns formatted string of additional data for use in the VAB and SPH More...
 
override void OnAwake ()
 Method fires once the module has been added to the part. Use for first time setup. Module will not have loaded fully by this point More...
 
override void OnSave (ConfigNode node)
 Use OnSave to serialize additional module information into the ConfigNode provided More...
 
override void OnStart (StartState state)
 Called when the part starts. The StartState gives an indication of where in flight you are. All values may not be plugged in! More...
 
- Public Member Functions inherited from PartModule
void AddPartModuleAdjuster (AdjusterPartModuleBase newAdjuster)
 Call this to add an adjuster to this part module. More...
 
void AddPartModuleAdjusterList (List< AdjusterPartModuleBase > moduleAdjusters)
 Applies the appropriate module adjusters. Performs checks to make sure that the adjusters are valid too. More...
 
bool AppliedUpgrades ()
 Returns true if upgrades are applied More...
 
void ApplyAdjustersOnStart ()
 Called when a part module is loaded and applies all of the currently loaded adjusters. More...
 
virtual void ApplyUpgradeNode (List< string > appliedUps, ConfigNode node, bool doLoad)
 Applies the upgrades to a confignode. Will either copy the upgrades back to the node or (if doLoad) calls load/onload on it. More...
 
virtual bool ApplyUpgrades (StartState state)
 Will find and apply upgrades. Called during Part's ModulesOnStart, before a module's OnStart. More...
 
void Awake ()
 
delegate bool boolPMApplyUpgrades (PartModule pm, StartState state)
 
delegate bool boolPMBoolDelegate (PartModule pm, bool apply)
 
void ClearPersistentId ()
 Clear the modules persistentId More...
 
void Copy (PartModule fromModule)
 
virtual bool FindUpgrades (bool fillApplied, ConfigNode node=null)
 Find applicable upgrades to the partmodule (isunlocked and isenabled) and add to the upgradesApplied list. Pass true if you want to add the upgrades to upgradesApplied, false if you just want to know if at least one upgrade is applicable (unlocked rather than enabled) More...
 
virtual string GetModuleDisplayName ()
 Override this to provide a Localized version of the PartModules Name for UI components More...
 
uint GetPersistentId ()
 Get the modules persistentID, and create one if it doesnt already have one More...
 
virtual string GetStagingDisableText ()
 
virtual string GetStagingEnableText ()
 
virtual string GetUpgradeInfo ()
 Called by Upgrade Stats dialog More...
 
bool HasUpgrades ()
 Returns true if upgrades exist for the partmodule More...
 
virtual bool IsStageable ()
 Should this module be counted when seeing whether to have a stack icon present? Override in a module for custom behavior; otherwise returns true if the module (or something the module inherits from above PartModule itself) overrides OnActive() More...
 
bool IsValidContractObjective (string objectiveType)
 Returns if, for example, an antenna part module qualifies as an antenna for contracts. More...
 
void Load (ConfigNode node)
 
virtual void LoadUpgrades (ConfigNode node)
 Loads module-relevant upgrades from the partmodule confignode More...
 
uint NewPersistentId ()
 Reset the modules persistentId to a new number More...
 
virtual void OnActive ()
 Called when the part is set active (after unpacking etc) More...
 
virtual void OnCopy (PartModule fromModule)
 Use OnCopy to copy any additional data from the PartModule provided More...
 
virtual void OnFixedUpdate ()
 Called every physics/fixed frame that the part is active More...
 
virtual void OnIconCreate ()
 Method fires just before components are stripped from the gameobject to make it an icon. (The part is instantiated and then various components like Part, PartModule, EffectBehaviour, Colliders, Particles, etc are stripped and then it's set as the icon prefab. This lets PartModules do stuff to the model right before that happens. More...
 
virtual void OnInactive ()
 Called before the part goes inactive (after packing etc) More...
 
virtual void OnInitialize ()
 Called on all modules after all parts are loaded but before they give the ship to the game More...
 
virtual void OnLoad (ConfigNode node)
 Use OnLoad to load any additional data from the ConfigNode provided More...
 
void OnModuleAdjusterAddedWrapper (AdjusterPartModuleBase adjuster)
 Wrapper to check the mission expansion availability before performing processing specific to this part module when an adjuster is added. More...
 
virtual void OnModuleAdjusterRemoved (AdjusterPartModuleBase adjuster)
 Perform processing specific to this part module when an adjuster is removed. By default this does nothing is up to each part module to implement it properly. More...
 
virtual void OnStartBeforePartAttachJoint (StartState state)
 Called in flight scene in Part.Start just before the Part attachnode joints are created. More...
 
virtual void OnStartFinished (StartState state)
 Called when the part finishes starting. The StartState gives an indication of where in flight you are. All values may not be plugged in! More...
 
virtual void OnUpdate ()
 Called every frame that the part is active More...
 
virtual void OnWasCopied (PartModule copyPartModule, bool asSymCounterpart)
 Called when the PartModule was copied, through Alt+Copy or symmetry More...
 
virtual void OnWillBeCopied (bool asSymCounterpart)
 Called when the PartModule is about to be copied, through Alt+Copy or symmetry More...
 
virtual string PrintUpgrades ()
 
void RemovePartModuleAdjuster (AdjusterPartModuleBase oldAdjuster)
 Call this to remove an adjuster from this part module. More...
 
void RemovePartModuleAdjusterList (List< AdjusterPartModuleBase > moduleAdjusters)
 Removes the appropriate module adjusters. Performs checks to make sure that the adjusters are valid too. More...
 
void Save (ConfigNode node)
 
virtual void SetStaging (bool newValue)
 Run by the part's staging toggle handler, sets staging on modules on symmetry counterparts. More...
 
virtual bool StagingEnabled ()
 Gets current staging status (is staging enabled for this module) Override me! More...
 
virtual bool StagingToggleEnabledEditor ()
 
virtual bool StagingToggleEnabledFlight ()
 
void ToggleStaging ()
 
virtual void UpdateStagingToggle ()
 Updates the staging toggle More...
 
delegate void voidPMApplyNodeDelegate (PartModule pm, List< string > appliedUps, ConfigNode node, bool doLoad)
 
delegate void voidPMDelegate (PartModule pm)
 
delegate void voidPMNodeDelegate (PartModule pm, ConfigNode node)
 

Public Attributes

bool isRelaying = true
 
bool showStatus = false
 
string status = string.Empty
 
- Public Attributes inherited from PartModule
bool isEnabled = true
 
bool moduleIsEnabled = true
 
string moduleName
 
bool overrideStagingIconIfBlank = true
 
ModuleResourceHandler resHandler = new ModuleResourceHandler()
 
bool showUpgradesInModuleInfo = false
 
ProtoPartModuleSnapshot snapshot
 
string stagingDisableText = ""
 
bool stagingEnabled = true
 
string stagingEnableText = ""
 
bool stagingToggleEnabledEditor = false
 
bool stagingToggleEnabledFlight = false
 
List< ConfigNodeupgrades
 
List< string > upgradesApplied = new List<string>()
 
bool upgradesApply = true
 
bool upgradesAsk = true
 

Additional Inherited Members

- Public Types inherited from PartModule
enum  PartUpgradeState { PartUpgradeState.NONE, PartUpgradeState.LOCKED, PartUpgradeState.AVAILABLE }
 
enum  StartState {
  StartState.None = 0, StartState.Editor = 1, StartState.PreLaunch = 2, StartState.Landed = 4,
  StartState.Docked = 8, StartState.Flying = 16, StartState.Splashed = 32, StartState.SubOrbital = 64,
  StartState.Orbital = 128
}
 
- Static Public Member Functions inherited from PartModule
static ReflectedAttributes GetReflectedAttributes (Type partModuleType)
 
static PartUpgradeState UpgradesAvailable (Part part)
 Returns true if at least one module on the part has at least one upgrade available (isUnlocked) More...
 
static PartUpgradeState UpgradesAvailable (Part part, ConfigNode node)
 Returns true if at least one module on the part has at least one upgrade available (isUnlocked) More...
 
- Static Public Attributes inherited from PartModule
static voidPMApplyNodeDelegate ApplyUpgradeNodeDel
 
static boolPMApplyUpgrades ApplyUpgradesDel
 
static bool ApplyUpgradesEditorAuto = true
 
static boolPMBoolDelegate FindUpgradesDel
 
static voidPMNodeDelegate LoadExpansionNodes
 Hook for loading extra nodes common to all part modules. More...
 
static voidPMNodeDelegate LoadUpgradesDel
 
static voidPMNodeDelegate SaveExpansionNodes
 Hook for saving extra nodes common to all part modules. More...
 
static voidPMDelegate SetupExpansion
 Hook for performing extra setup common to all part modules. More...
 
static string UpgradesAvailableString = "#autoLOC_6002273"
 
static string UpgradesLockedString = "#autoLOC_6002274"
 
- Protected Member Functions inherited from PartModule
ConfigNode GetUpgrade (string name)
 
virtual void LoadUpgradesApplied (List< string > applieds, ConfigNode node)
 Load the applied upgrade names More...
 
virtual void OnModuleAdjusterAdded (AdjusterPartModuleBase adjuster)
 Perform processing specific to this part module when an adjuster is added. By default this does nothing is up to each part module to implement it properly. More...
 
virtual void SaveUpgradesApplied (ConfigNode node)
 Save the applied upgrades. More...
 
IEnumerator UpgradeWaitForScenarioModules ()
 
- Static Protected Attributes inherited from PartModule
static Dictionary< string,
ConfigNode
exclusives = new Dictionary<string, ConfigNode>()
 
static Dictionary< Type,
ReflectedAttributes
reflectedAttributeCache = new Dictionary<Type, ReflectedAttributes>()
 
- Properties inherited from PartModule
BaseActionList Actions [get]
 
int ClassID [get]
 
string ClassName [get]
 
List< AdjusterPartModuleBaseCurrentModuleAdjusterList [get]
 List of all the module adjusters that are currently active on this part module. More...
 
BaseEventList Events [get]
 
BaseFieldList Fields [get]
 
string GUIName [get]
 
bool HasAdjusters [get]
 Has this part module been adjusted? More...
 
ReflectedAttributes ModuleAttributes [get, set]
 
Part part [get, set]
 
uint PersistentId [get]
 A unique identifier for each vessel including from when it was Shipconstruct More...
 
Vessel vessel [get]
 

Detailed Description

Enables relay for all antennas, not just those of type RELAY. Takes the use ModuleResource setup (RESOURCE)

Member Function Documentation

bool CommNet.ModuleRelayEnabler.CanRelay ( )
inline

Called when the vessel is loaded, so called on the actual part

Returns

Implements CommNet.IRelayEnabler.

bool CommNet.ModuleRelayEnabler.CanRelayUnloaded ( ProtoPartModuleSnapshot  mSnap)
inline

Called on the part prefab's module, and passed the snapshot of the unloaded vessel's copy of the module

Parameters
mSnap
Returns

Implements CommNet.IRelayEnabler.

virtual void CommNet.ModuleRelayEnabler.FixedUpdate ( )
inlinevirtual
List<PartResourceDefinition> CommNet.ModuleRelayEnabler.GetConsumedResources ( )
inline

Implements IResourceConsumer.

override string CommNet.ModuleRelayEnabler.GetInfo ( )
inlinevirtual

Returns formatted string of additional data for use in the VAB and SPH

Returns

Reimplemented from PartModule.

override void CommNet.ModuleRelayEnabler.OnAwake ( )
inlinevirtual

Method fires once the module has been added to the part. Use for first time setup. Module will not have loaded fully by this point

Reimplemented from PartModule.

override void CommNet.ModuleRelayEnabler.OnSave ( ConfigNode  node)
inlinevirtual

Use OnSave to serialize additional module information into the ConfigNode provided

Parameters
node

Reimplemented from PartModule.

override void CommNet.ModuleRelayEnabler.OnStart ( StartState  state)
inlinevirtual

Called when the part starts. The StartState gives an indication of where in flight you are. All values may not be plugged in!

Parameters
state

Reimplemented from PartModule.

Member Data Documentation

bool CommNet.ModuleRelayEnabler.isRelaying = true
bool CommNet.ModuleRelayEnabler.showStatus = false
string CommNet.ModuleRelayEnabler.status = string.Empty

The documentation for this class was generated from the following file: